18N640 Field Court
Dundee, Illinois 60118
(847) 836-9148 Voice/Fax
order email via .pdf only
PLEASE NOTE: THERE HAS BEEN A PRICE INCREASE IN CUSTOM BOARDS AND IN THE NEGATIVE FILM COST
In addition to published projects, FAR Circuits offers a prototype service specializing on single-sided, and also non plated-through double-sided boards from Customer supplied artwork. FAR Circuits can also provide custom layout for printed circuit boards when required. We do layout of the foil sided(s), solder mask, and component legends, and documentation. Additionally, we offer a Confidential service for authors writing articles that may require a printed circuit board for their project. Please inquire for rates on custom projects; our Catalog of stocked boards is listed below. FAR Circuits will supply, upon request, a copy of the referenced publication article for $1.50 each in addition to PC board cost. Please indicate article requests on a separate line on the order form. Orders accepted by surface mail, phone, PAYPAL, or FAX. All orders are to be prepaid by check, money order, VISA or Master Card credit card or PAYPAL. Credit card orders may be faxed or phoned to 847-836-9148. To order please indicate the ship to address, home phone number, quantity of boards, magazine article title, publication, issue date, and any other information that would be helpful in identifying the board. Please use Order Form. FAR Circuits ships all orders via 1st class mail unless otherwise noted. All boards are made of G-10, FR-4 material, 1 oz. copper, solder coated, and drilled. Double sided boards DO NOT have plated through holes. Custom boards may be made for $.60 square inch or $5.00 minimum per board for single sided, etched, drilled and solder coated. Custom double sided non-plated through holes, etched, drilled and solder coated boards may be made for $.85 per square inch or $8.00 minimum per board. A clear film negative is required for custom boards. Film from camera ready artwork is $12.00 per shot based on 8" x 10" film per shot. Quantity pricing available. Far Circuits reserves the right to change the pricing based on the complexity of the board. FAR Circuits offers layout and prototype services. Please call for these details.
PAYPAL ORDERS, SEND ME AN EMAIL OF YOUR REQUIREMENTS AND REQUEST A PAYPAL INVOICE , I WILL THEN SEND YOU AN INVOICE TO THAT EMAIL.
The lines highlighted in BLUE indicate that a description is available for that project, Just double click on the line highlighted in BLUE and the description will be shown
THE FAR CIRCUITS CD NOW ON DVD TO HOLD ALL THE ADDITIONAL PROJECTS ADDED TO THE CD. $8.50 pp FOR THE DVD OR $5.00 WITH AN ORDER.
ODEMS AND COMPUTER INTERFACES DIGITAL DIGITAL VOX SOUND CARD INTERFACE BY SKIP TELLER (CLICK HERE DESCRIPTION) $5.00
UNDER RF AMPLIFIERS OZ1PIF 50 MHZ 250 WATT POWER AMPLIFIER MODUSE, TWO BOARD SET TWO SETS ARE REQUIRED FOR 500 WATT AMP. $16,00 PER SET
DAVE EK CIRCLE SETTINGS GENERATOR THE CIRCLE SETTINGS WITH USB INTERFACE KIT $20.00 (CLICK HERE FOR DETAILS)
UNDER TEST EQUIPMENT
QST June 2012 Bloom LOGIC PROBE $7.00 (CLICK HERE)
QST JAN 2012 ALAN BLOOM TRANSISTOR TESTOR $5.00 (CLICK HERE)
QST NOV. 2011 FOUR TONE SSB TEST GENERATOR by AK4AA MINI KIT $15.00. CLICK FOR DETAILS, NOTE!! THE FIRST BOARDS SHIPPED HAVE A ERROR ON THE ARTWORK, THE JUNCTION OF C1, C2, R13, AND R14 NEED TO BE CONNECTED TO GROUND.
QST NOV. 2011 INTERNAL FULL BREAK-IN KEYING INTERFACE FOR THE ALS-600 AMPLIFIER BY AD5X , KIT OF PARTS AND P C BOARD $12.00 CLICK HERE FOR DETAILS
TONY ENGDAHI TIME DOMAIN REFLECTOMETER KIT $10.00 SEE BOARD (CLICK HERE) www.epanorama.net/circuits/tdr.html
UNDER POWER SUPPLIERS
MINI REGULATOR CIRCUITS FOR 78xx and 78LXX KIT $4.00 CLICK HERE FOR DETAILS
REBUILD ASTRON POWER SUPPLY SEE WWW.BWCELECTRONICS.COM FOR THE PS-15D-122 models $5.00
TS-930 POWER SUPPLY BOARD BY VK4AMZ SEE http://brisdance.com/vk4amz/ts930.html $7.00 EA
BOARD TO REBUILD THE MLA-2500 CAPACITORS WITH SNAP IN CAPACITORS (CLICK HERE TO VIEW BOARD) AND (HERE)
K1SG 6 KV POWER SUPPLY, 10 CAP BOARD, 48 DIODE FULL WAVE BRIDGE, TWO BOARD SET $35.00 (CLICK HERE) ALSO (CLICK HERE)
UNDER STATION ACCESSORIES
HOT OFF THE PRESS, A KIT FOR QST NOV. 2011 INYERNAL FULL BREAK-IN KEYING INTERFACE FOR ALS-600 AMPLIFIER $12.00 CLICK HERE FOR DETAILS
SWITCH CONTROL BOARD FOR THE QST APRIL 05 K04NR 6 POSITION ANTENNA SWITCH BOARD ONLY$7.00. (CLICK HERE FOR DETAILS) KIT OF PARTS $34.00
UNDER RECEIVERS
QPR COM QUARTERLY WINTER 2011, DALTON" SESE80 SSB RECEIVER KIT, (Click here for info) $50.00
QST FEB.2011 COMPACT 40 METER RECEIVER BY W7JI $15.00
STEVE WEBBER SSB2 RECEIVER BOARD $7.00 http://kd1jv.qrpradio.com/ssbrig2/SSB2.HTM
UNDER AUDIO "
The SM0VPO 4 watt audio amplifier $5.00 each See details here: http://www.sm0vpo.com/_download/index.htm
AA-10A-1 25 Watt Audio Amplifier by John Keith $16.00 DETAILS AT http://www.bwcelectronics.com/projects/AA10A090.pdf
UNDER CODE PRACTICE OSCILLATORS
THE NOW YOUR TALKING CODE PRACTICE OSCILLATOR KIT COMPLETE WITH ALL THE PARTS, MOUNTING BOARD AND SPEAKER, BATTERY NOT INCLUDED $20.00 (Click here for picture)
THE CODEPHASER BY DJ5IL GOOGLE "THE CODEPHASER" $6.00
UNDER WATT METERS
JAN. 2011 MODERN DIRECTIONAL POWER SWR METER, FOUR BOARD SET, MAIN BOARD, POWER SUPPLY BOARD, AND TWO A TO D BOARDS $25.00 + PROGRAMMED PIC IS $10.00 (interconnect diagram) (top bd view) (foil view) (component overlay) (parts list) and (updates to the project)
RF TOROIDS AVAILABLE FROM FAR CIRCUITS
T37-6 $1.50 ea., T68-2 $2.00ea., T50-2 $2.00 ea., T50-6 $2.00 ea.
K9AY IS AVAILABLE IN COMPLETE KIT CLICK HERE FOR DETAILS
CHECK OUT WITH PAYPAL FROM YOUR ACCOUNT
YOU MUST ADD A ITEM FOR SHIPPING OR YOUR ORDER WILL BE RETURNED
|
FOR THOSE UNQUIE AND HARD TO FIND PARTS, VISIT www.danssmallpartsandkits.net |
EFFECTIVE NOW! ALL US SHIPPING WILL BE AT THE PRIORTY RATE OF $5.50 UNLESS IT WILL NOT FIT IN A PRIORTY ENVELOPE, THEN THE RATE IS $8.50.
The lines highlighted in BLUE indicate that a description is available for that project, Just double click on the line highlighted in BLUE and the description will be shown.
If you have ordered from FAR Circuits before .... please check this link.
Read comments from builders of projects with FAR Circuits boards. CLICK THIS LINK
